Show Ports Info Atm Ports Command; Figure 29 Show Ports Info Atm Ports Command Output - Nortel Passport Module 8672A Using Manual

Chapter 5 Managing the Passport 8672ATM Module with the CLI
Table 21 Information fields for the show ports info atm all command (continued)
Field
ENCAPS
SERVICE TYPE
VLAN ID
PVC LIST
VLAN MAC ADDRESS
LOCAL IP ADDRESS
REMOTE IP ADDRESS
IPX NETWORK NUMBER
IPX ENCAP

show ports info atm ports command

This command displays information
ports. The command uses the syntax:
show ports info atm ports

Figure 29 show ports info atm ports command output

Passport-8610:5/show/ports/info/atm# ports
=======================================================================
=======================================================================
PORT MDA
NUM DESCRIPION
-----------------------------------------------------------------------
3/1 OC-12c MM
3/5 Quad OC-3c MM enable
3/6 Quad OC-3c MM enable
3/7 Quad OC-3c MM enable
3/8 Quad OC-3c MM enable
Passport-8610:5/show/ports/info/atm#
Description
Encapsulation methods: either null, or llc-snap.
Unspecified bit rate (ubr) or variable bit rate (vbr).
VLAN name to which the ELAN belongs.
List of permanent virtual circuits.
The MAC address assigned to this VLAN (used in IP and
IPX routed circuits when there is no appropriate destination
MAC to use).
The local Ip address for connection type IP.
The remote Ip address for connection type IP.
Network number.
Encapsulation method: llc, snap, ether-ii or raw.
(Figure 29)
ATM Port Configuration
SCRAMBLE FRAMING MAX-BITS CLOCK
ENABLE MODE VPI VCI
enable SONET 4
SONET 2
SONET 2
SONET 4
SONET 4
about the configuration of ATM
LOOPBACKADMIN STATUS
SOURCE MODE STATE
9 free off
9 free off
9 free off
7 free off
7 free off
Using the Passport 8672ATM Module
85
up up
up up
up down
up up
up up