Table of Contents
Advertisement
29.2
Touch Panel Check
Touch panel check function
Touch panel check function checks whether there is no dead zone area of 2 dots
Display operation of Touch panel check
Main Menu
Notes on Touch panel check
If the touched part is not filled with yellow color, there are the following two possible causes.
1. Display part failure
2. Touch panel failure
In that case, contact your local Mitsubishi (Electric System) Service.
Touch
[Maintenance].
2 dots.
Maintenance
Touch
[Panel check].
Panel check
29 MAINTENANCE
385
29.2 Touch Panel Check
29
Advertisement
Table of Contents
Troubleshooting
