31.2
Prior Preparations for Installing Boot OS and
System Application
For the installation using GOT, the data storage that is storing Boot OS or the system application is required.
There are the following three methods for the installation of Boot OS and system application.
[To Memory Card] from GT Designer3
GT Designer3 (GOT2000) Screen Design Manual
Uploading from another GOT (the package data has been installed)
Page 389 BootOS and System Application Installation Using Data Storage
Using an SD card that stores data with OS boot drive set to A drive
GT Designer3 (GOT2000) Screen Design Manual
Precautions when installing Boot OS and the package data into an SD card
When installing Boot OS and the package data into the SD card, be sure to execute by the utility of another
GOT or GT Designer3.
The installation is not executed properly with the SD card to which data is uploaded from the utility of GOT or
copied by software other than GT Designer3.
Note the available capacity of the SD card.
The available capacity of Boot OS and system applications can be confirmed by [To Memory Card] or [Write
Option] of GT Designer3.
Write Option
31 INSTALLATION OF Boot OS AND BASIC SYSTEM APPLICATION
392
31.2 Prior Preparations for Installing Boot OS and System Application
Available space of the data
Available space of the system application