Mitsubishi Electric GOT SIMPLE Series Operation Manual page 232

Utility call key setting operation
• When the utility call key is not set (set to 0-point)
Even when the utility call key is not set (set to the zero point), you can display the main menu by performing
the following operation.
Pressing the special function switch set on the user-created screen
Page 184 Display operation of main menu
• Precautions on using the alarm popup display
When [Display Position Switching] is set to [Yes] in the alarm popup display setting, set either of the following
for the utility call key.
Setting the position of the utility call key to the upper-right or lower-left corner
Setting [Press Time] of the utility call key to 1 or more seconds
When [Press Time] is set to 0 and the key position is set to the lower-left corner, the operation is as described
below. If the positions of the key and the alarm popup display overlap, the utility screen appears by switching
the display position of the alarm popup display.
For the alarm popup display, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
• When limiting the display and operation of the utility
When limiting the display and operating users, set a password to the GOT using GT Designer3. If a user tries
to display the main menu of the utility, the password is displayed.
Refer to the following for the details related to the password setting.
GT Designer3 (GOT2000) Screen Design Manual
24 DISPLAY AND OPERATION SETTINGS (GOT SET UP)
230
24.2 Operation Setting (Settings for Operation)
1.
Touch or displayed at the four corners of the setting
screen. The button repeats
Change the part to be set as a key position to
position, 0 or 1 point can be specified.
2.
When setting 1 point, specify the time to switch to the utility in
case of keeping pressing the key position. Touch the time input
area.
3.
Touching the input area displays a keyboard. Input numeric with
the keyboard.
4.
Touch the [ ] button to save the changes.
every time it is pressed.
. For the key