Mitsubishi Electric GOT SIMPLE Series Operation Manual page 206

■Change of host
Touch YES.
■Change of Net No.
Touch YES.
23 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
204
23.3 Ethernet Communication
1.
Touch the device to be set as the host.
2.
After the setting change, touch the [×] key. When the screen shown
on the left appears, touch the [YES] key.
1.
Touch the Net No. to be changed, and input the network No. to be
changed by the numeric keypad displayed.
2.
After the setting change, touch the [×] key. When the screen shown
on the left appears, touch the [YES] key.