Mitsubishi Electric GOT SIMPLE Series Operation Manual page 161

Serial communication connection
17
■RS-232 cable and RS-422 cable
Strip off the sheath at both ends of the cable as shown in the figure below to expose braided shield for grounding.
The braided shield sections are used for grounding with a cable clamp.
Page 161 Grounding a cable
Ferrite core
GOT side
(ZCAT3035-1330)
PLC CPU side
100 or less 100 or less
Unit: mm (inch)
(3.94) (3.94)
230 or less 40 40 230 or less
(9.06) (1.58) (1.58) (9.06)
Non-Mitsubishi PLC, inverter, and servo amplifier connections
Create the cables (RS-232 cable, RS-422/485 cable) for connecting the GOT and a controller by yourself.
For how to create a cable, refer to the following.
GOT2000 Series Connection Manual For GT Works3 Version1
17 EMC DIRECTIVE
159
17.2 EMC Directive Requirements