Mitsubishi Electric GOT SIMPLE Series Operation Manual page 253

■Add operation
Add operator information to the GOT.
1.
Touch the [Add] button.
2.
The Operator information edit screen is displayed,
and then touch an item to be edited.
(a) OperatorName
(b) OperatorID
(c) Level
(d) Password
(e) Expiration
(f) External auth
(g) Ext.auth. ID
(a) If the operator name is touched, a keyboard is displayed. Input an
operator name with the keyboard.
Character types to be input can be changed by touching the [KEY]
button.
When the input is completed, touch the [ENT] key.
(b) If the operator ID is touched, a keyboard is displayed. Input an operator
ID.
Character types to be input can be changed by touching the [KEY]
button.
When the input is completed, touch the [ENT] key.
(c) If the level is touched, a keyboard is displayed. Input an operator level.
Character types to be input can be changed by touching the [KEY]
button.
When the input is completed, touch the [ENT] key.
When the level of the logged-in operator is changed during editing of the
operator information, a new level is not reflected until you log out of the
GOT once and log in the GOT again.
(d) For changing passwords during editing, touch the password. A keyboard
is displayed, and then input a password.
When the input is completed, touch the [ENT] key.
When the password input is completed, the New password input
confirmation dialog box is displayed. Input the same password.
25 SECURITY LEVEL AND OPERATOR SETTINGS (SECURITY SETTING)
25.2 Operator Authentication
25
251