Operation Procedures - Mitsubishi Electric GOT SIMPLE Series Operation Manual

Operation procedures

This section describes the contents of the MELSEC-FX list editor and the key functions displayed on the screen.
Key arrangement and a list of key functions
The arrangement and functions of the keys displayed on the MELSEC-FX List Editor window are described below.
Displayed contents
1)
3)
4)
No. Item
1) Channel No.
2) Mode
3) Error message
4) List display area
5) Key area
28 GOT SELF CHECK (DEBUG)
354
28.2 FX List Editor
5)
Display contents
Displays the currently selected channel number.
Touching "ChNo." displays the communication setting window.
The communication setting window is not displayed if the MELSEC-FX list editor is started from the FX ladder monitor.
Displays a mode for MELSEC-FX list editor.
Page 356 Selection and operation of modes
[Monitor] is displayed when the list monitor is executed.
Page 374 List monitor
Displays the contents of errors that occur with the MELSEC-FX list editor.
Page 376 Error messages and corrective actions
Displays the sequence program in list format (12 digits).
The position (line) that can be edited is displayed with a bar.
Displays the keys that can be used with the MELSEC-FX list editor.
2)