Error Messages And System Alarms - Mitsubishi Electric GOT SIMPLE Series Operation Manual

*1 For the details of the GOT special registers (GS262 to GS264), refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
*2 FXCPU has error codes 100 to 109, indicating the status of M8060 to M8069.
(Example) If error code (100) occurs, handle the error according to the M8060 description.
*3 The GOT displays the error code displayed on the servo amplifier (hexadecimal) in decimal + 20000.
Therefore, when referring to the manual of the servo amplifier with the error code displayed on the GOT using the system alarm,
subtract 20000 from the GOT error code and convert the last 3 digits into the hexadecimal number.
(Example: When the GOT system alarm shows 20144, the error code of the servo amplifier is 90H.)
*4 Depending on the error code, the channel No. is not stored.
For channel No. storage availability of each error code, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
*5 With the system alarm related to the file access, you cannot identify the drive where the alarm occurs. However, you can identify the
drive by checking the File Access Error signal (b7 to b10) of System signal 2-2.
*6 The GOT displays the error code corresponding to an error occurring in the multiple CPU system.
Check the error details with MT Developer or MT Works2.
For error handling, refer to the manual of the Motion CPU.
*7 The GOT displays the error code corresponding to an error occurring in the multiple CPU system.
Check the error details with the CNC monitor.
For error handling, refer to the manual of the CNC.
*8 The GOT displays the error code corresponding to an error occurring in a robot controller in the multiple CPU system or a standalone
robot controller.
Check the error details with RT ToolBox2 or RT ToolBox3.
For error handling, refer to the manual of the robot controller.
*9 The GOT displays the error code corresponding to an error occurring in an RCPU or Motion CPU (MELSEC iQ-R series).
Check the error details with GX Works3 or MT Works2.
For error handling, refer to the manual of the RCPU or Motion CPU (MELSEC iQ-R series).
*10 The GOT displays the error code corresponding to an error occurring in an FX5CPU.
Check the error details with GX Works3.
For error handling, refer to the manual of the FX5CPU.

Error messages and system alarms

For the details of the error messages and the system alarms displayed on the GOT, refer to the following.
GOT2000 Series User's Manual (Utility)
11 TROUBLESHOOTING
118
11.2 Error Messages and System Alarms