Display Contents Of Ethernet Setting - Mitsubishi Electric GOT SIMPLE Series Operation Manual

Display contents of Ethernet setting

The following describes the setting items and the display contents of the Ethernet setting.
Ethernet setting items
Channel select tab
Channel select tab
Channels can be switched.
Switching to the channel which does not have the Ethernet setting is not available.
Ethernet setting items
The contents of the Ethernet setting configured in GT Designer3 are displayed.
Changing [Host], [Net No.], [Station No.] and [IP Address] are available.
Page 204 Change of host
Page 204 Change of Net No.
Page 205 Change of station No.
Page 205 Change of IP address
How to cancel the change of the setting in the [Ethernet setting] screen
Cancel the settings changed in the [Ethernet setting] screen with the [Restore default settings] button.
The changed settings remain until they are canceled with the [Restore default settings] button.
The changed settings are not canceled even if writing the project data or system application to the GOT.
When the project data is written to the GOT without canceling the changed settings, those changed settings
are reflected to the Ethernet setting of the written project data.
(If the written project data does not have a channel with same Ethernet settings as that of the channel
changed in [Ethernet setting] screen, the changed settings are not reflected.)
23 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
23.3 Ethernet Communication
23
203