Connection of power cables and ground cables
Carry out wiring and connect the power and ground cables according to the following instruction.
By the different wiring or connection method, the system may not comply with EMC Directive.
Wiring method
As shown in the figure below, connect the power cable and the ground cable, and then attach a ferrite core (ZCAT3035-1330,
manufactured by TDK Corporation) within the specified range.
Make sure to ground the FG cable.
For connection of power cables and ground cables, refer to the following.
Page 55 Connection of power and ground cables
■GS2512-WXTBD
(FG)
INPUT
24VDC
-
+
Ferrite core
(ZCAT3035-1330)
6 EMC DIRECTIVE
6.2 EMC Directive Requirements
6
59