Mitsubishi Electric GOT SIMPLE Series Operation Manual page 135

13
OVERVIEW
About GOT
A GOT is installed on the panel surface of a control panel or operating panel and connects to the PLC within the control panel.
The GOT carries out switch operation, lamp display, data display, message display, etc.
PLC
Connector for
program
13
GOT
For the display screen, two kinds of screens are available: user screen and utility screen.
■User screen
The user screen refers to a screen created using the screen design software.
The objects "Touch switch", "Lamp display", "Comment display", and "Numeric display" can be arbitrarily arranged on the
display.
Moreover, multiple screens created within the screen design software can be individually selected or overlapped for the
display.
For details, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
■Utility Screen
The utility screen is a factory drawn horizontal screen that cannot be edited.
The utility screen can be displayed on the GOT by installing the standard monitor OS from the screen design software or an
SD card to the GOT.
Such as [Brightness] and [Time setting] can be set from the utility screen.
For details, refer to the following.
Page 179 UTILITY FUNCTION to Page 399 TROUBLESHOOTING
13 OVERVIEW
133