Mitsubishi Electric GOT SIMPLE Series Operation Manual page 207

■Change of station No.
Touch YES.
■Change of IP address
Touch YES.
1.
Touch the station No. to be changed, and input the station No. of the
destination Ethernet module to be changed by the numeric keypad
displayed.
2.
After the setting change, touch the [×] key. When the screen shown
on the left appears, touch the [YES] key.
1.
Touch the IP address to be changed, input the destination IP
address to be changed by the numeric keypad displayed.
2.
After the setting change, touch the [×] key. When the screen shown
on the left appears, touch the [YES] key.
23 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
23.3 Ethernet Communication
23
205