20
OPTION
20.1
SD Card
The SD card is used to transfer the OS or project data and to save the data of the alarm history function.
For details, refer to the following.
Page 275 CONTROL OF VARIOUS DATA (DATA CONTROL)
Applicable SD card
The following SD cards are applicable for GOT.
Model
L1MEM-2GBSD
L1MEM-4GBSD
NZ1MEM-2GBSD
NZ1MEM-4GBSD
NZ1MEM-8GBSD
NZ1MEM-16GBSD
Installation/removal procedure of SD card
Install/remove the SD card when the power supply of the GOT is OFF or [Access inhibit] is set in the [SD card access] setting
of the GOT.
Installation
SD card
surface
Specifications
SD memory card 2 GB
SDHC memory card 4 GB
SD memory card 2 GB
SDHC memory card 4 GB
SDHC memory card 8 GB
SDHC memory card 16 GB
1.
Touch [Main Menu]
[Data]
[Permissions] to set [Access inhibit].
Page 306 SD Card Access
Check that the SD card access LED turns off.
When the SD card access LED is off, the SD card can be
installed or removed even when the GOT is on.
2.
Insert a SD card into the SD card interface with its front
side (nameplate side) outside.
3.
Touch [SD card access]
[Permissions]. Check that the SD card access LED
turns on.
[SD card access]
[Access inhibit] to set
20 OPTION
177
20.1 SD Card
20