Mitsubishi Electric GOT SIMPLE Series Operation Manual page 304

Operation of operation log information
■Display operation of operation log information
When the Prohibit Operation Log Information Operation signal (GS522.b3) is turned on, the [Del], [Copy], and
[Convert] buttons are not displayed.
For the details, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
27 CONTROL OF VARIOUS DATA (DATA CONTROL)
302
27.3 Resource Data Information
1.
If a drive of [Select drive] is touched, the information of
the touched drive is displayed.
2.
If a folder name is touched, the information of the
touched folder is displayed.
3.
If a folder of ". ." is touched, the information of the folder
in one upper hierarchy is displayed.
4.
If the button of the scrollbar is touched, the
screen scrolls up/down by one line.
5.
If a file name is touched, the file is selected.
6.
For G2O → CSV conversion, G2O → TXT conversion,
deleting, copying, and renaming, refer to the following.
G2O → CSV or G2O → TXT conversion
Page 303 G2O → CSV conversion operation, G2O →
TXT conversion operation
Delete
Page 304 Deletion operation
Copy
Page 305 Copy operation
7.
If the [×] button is touched, the screen is closed.