Mitsubishi Electric GOT SIMPLE Series Operation Manual page 152

Part names of the back panel
No. Name
(1) RS-232 interface
(2) RS-422/485 interface
(3) RS-422 interface
(4) Ethernet interface
(5) USB interface (Device)
(6) Hole for preventing the USB cable from unplugging
(7) Terminating resistor setting switch
(8) Rating plate
(9) SD card interface
(10) SD card access LED
(11) Vertical installation arrow mark
(12) Power terminal
(13) Ethernet communication status LED
16 PART NAME
150
16.2 Back Panel
Specifications
For communicating with a controller (connector shape: D-sub 9-pin (male), #4-40UNC
inch screw thread)
For the connecter specifications (such as pin layout and screw type) of the RS-232
interface, refer to the following.
Page 145 RS-232 interface
For communicating with a controller (connector shape: D-sub 9-pin (female), M2.6 metric
screw thread)
For the connecter specifications (such as pin layout and screw type) of the RS-422/485
interface, refer to the following.
Page 145 RS-422 interface and RS-422/485 interface
For communicating with a controller (connector shape: D-sub 9-pin (female), M2.6 metric
screw thread)
For the connecter specifications (such as pin layout and screw type) of the RS-422
interface, refer to the following.
Page 145 RS-422 interface and RS-422/485 interface
For communicating with a controller or connecting a personal computer (Connector
shape: RJ45 (modular jack))
USB interface for data transfer and saving
Hole for preventing the USB cable from unplugging with a banding band
For switching the terminating resistor setting of the RS-422/485 communication port to
330 Ω, 110 Ω, or OPEN
Model name, current consumption, production number, hardware version, and Boot OS
version are described.
Interface for mounting an SD card to the GOT
ON: SD card is accessed, OFF: SD card is not accessed
For the vertical installation, install the GOT so that the arrow points upward.
Power terminal and FG terminal (for power supply (24 V DC) to GOT and grounding)
SD RD: Green light while data are being sent or received, 100 M: Green light when the
transmission speed is 100 Mbps