System configuration
GOT
Use the following GOTs having a CE mark on the rating plate.
For how to check the hardware version of the GOT, refer to the following.
Page 123 Confirming of Versions and Conforming Standards
○: Compliant ×: Not compliant
Product name
GS2512
Connection type
The following table lists the connection types compliant with the EMC Directive.
○: Compliant ×: Not compliant
*1
Connection type
Ethernet connection
Direct CPU connection (serial)
Serial communication connection
CC-Link connection (Via G4)
GOT multi-drop connection
Other connections (Connection with non-Mitsubishi Electric PLC, microcomputer, inverter, temperature controller, servo amplifier, CNC,
and MODBUS equipment)
*1 For the details of each connection type, refer to the following manual.
GOT2000 Series Connection Manual For GT Works3 Version1 that covers the controller used
*2 When connecting the GOT to other controllers such as a non-Mitsubishi Electric PLC, fabricate connection cables and configure the
system following the EMC Directive specifications.
Page 62 Non-Mitsubishi Electric PLC, microcomputer, temperature controller, inverter, servo amplifier, CNC, MODBUS/RTU, and
MODBUS/TCP connections
Connected devices
When connecting the GOT to a non-Mitsubishi Electric PLC, refer to the manual about the EMC Directive
compliance of the connected device (such as a PLC and a microcomputer).
Cable
For the details of the cables used, refer to the following manual.
GOT2000 Series Connection Manual For GT Works3 Version1 that covers the controller used
Fabricating cables
To comply with the EMC Directive, fabricate cables (including user-created cables).
For how to fabricate a cable, refer to the following.
Page 60 Fabricating a connection cable
6 EMC DIRECTIVE
58
6.2 EMC Directive Requirements
Model
Hardware version (Manufacture year and month)
GS2512-WXTBD
Version A or later (December 2022)
*2
EMC Directive
○
GS25
○
○
○
×
○
○