Mitsubishi Electric GOT SIMPLE Series Operation Manual page 245

■Setting exception IP addresses
[Exception IP address] can be set only when [Range] is selected.
1.
Select a target row, and touch the [Setting] button.
2.
Touch a target row to select it.
2. 1.
3.
Touch the same row again to display the screen shown below.
4. 1.
4.
Touch a number to display a software keyboard. Input an exception IP address.
5.
After completing the entry, touch the [×] button.
6.
On the displayed screen, touch the [×] button to display the previous screen.
1.
1. 5.
6. 1.
24 DISPLAY AND OPERATION SETTINGS (GOT SET UP)
243
24.7 IP Filter Setting
24