Mitsubishi Electric GOT SIMPLE Series Operation Manual page 324

Setting password for backup/restore
The password for the backup/restore can be set only when the following condition is satisfied at the first backup.
• When passwords are set for the files for the backup target controller
At the first backup, the password authentication for the controller is required.
The following shows the operating procedure at the first backup.
For details, refer to the following.
Page 327 Operation of backup/restore
Touch [Backup] in the main menu on the GOT.
(The first backup)
Other than the FXCPU
Is a password set for the
file to be backed up?
Input the password for the controller.
(When the password for the first file is verified,
the other files are automatically verified using
the password for the first file. When the
automatic verification fails, input the
corresponding password.)
No
Is the password correct?
The file is backed up.
Yes
Is there another file?
Yes
Is there another unit?
(In the multiple CPU system)
Is there another controller to
Yes
be backed up?
(when with controller list file)
Set the password for the backup/restore.
(Set 32 or less alphanumeric characters
for the password.)
*1 For details, refer to the following.
Page 327 Operation of backup/restore
27 CONTROL OF VARIOUS DATA (DATA CONTROL)
322
27.8 BACKUP/RESTORE
Start
*1
Yes
Yes
No
No
No
Backup completed
FXCPU
No
When a keyword is set,
disable the keyword.