Mitsubishi Electric GOT SIMPLE Series Operation Manual page 310

Operation of SD card format
Restrictions on formatting
• When using an unformatted SD card in the GOT, format it by a personal computer. The GOT cannot format
the unformatted SD card.
• The format of the GOT does not change the file system (Example: FAT16) of the SD card and inherits the
file system before the format.
27 CONTROL OF VARIOUS DATA (DATA CONTROL)
308
27.5 SD Card Format
1.
Install an SD card to the GOT. For installation/removal
procedure of an SD card, refer to the following.
Page 177 Installation/removal procedure of SD card
2.
Touch and select the drive to format by drive selection.
3.
Touch the [FORMAT] button to display the password
input screen.
4.
Type and touch the [Enter] key. The dialog
1 1 1 1
shown left will appear. (The password is fixed to 1111.)
Check the description in the dialog, and touch the [YES]
button to format the SD card. To cancel the format,
touch the [NO] button.
5.
When the formatting is completed, the completion dialog
mentioned left is displayed.
6.
To close the dialog box, touch the [OK] button.