Table of Contents
Advertisement
• For GS2110-WTBD, GS2107-WTBD
Standard I/F-2(RS-232)
Standard I/F-4(Ethernet)
■Channel No. specification menu BOX
Set a channel number to be used by the standard interface.
Page 198 Channel setting operation
For the detail of the drivers which can be assigned to each channel, refer to the following.
Page 193 Driver display BOX
0:
Set when the communication interface is not used.
1, 2:
Set when connecting to a controller.
8:
Set when connecting to a barcode reader or RFID.
*1
9:
Set when connecting to a personal computer (screen design software).
*:
Set this channel when the gateway function (except when the connection with controllers is the Ethernet connection) or the Ethernet download function
is used.
*1 "9" is automatically set to the standard I/F-3(USB).
■Driver display BOX
The driver display box displays the names of communication drivers assigned to channels or the communication drivers set in
the communication settings of the screen design software.
For details of the communication drivers to be displayed, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
"Disuse" is displayed in the driver display box in the following cases:
• The communication driver is not installed.
Page 199 Driver setting operation
• "0" is set in the channel number specification menu box.
The channel number of the standard I/F-3(USB) is fixed to "9".
■[Drv] button
Displays the driver setting screen.
Select the driver to use on the driver setting screen.
Page 199 Driver setting operation
The [Drv] button is displayed in the following case.
• When a channel number other than channel 0 or 9 is set to the standard I/F-1, standard I/F-2, and standard I/F-4
Standard I/F-3(USB)
Standard I/F-1(RS-422)
23 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
193
23.1 Standard I/F Setting
23
Advertisement
Table of Contents
Troubleshooting
