For Standard I/F-4(Ethernet)
Communication parameter setting in the screen design software
Set the communication parameter for each communication driver by selecting [Common]
Setting].
GT Designer3 (GOT2000) Screen Design Manual
1.
Touch the driver display box of a communication parameter to be
set.
2.
The screen is switched to the communication detail setting. Set the
communication parameter on this screen.
GOT IP address setting
Page 200 GOT IP Address Setting
3.
When the [ ] button is touched, it returns to the previous screen.
4.
Touch the [ ] button to display the window confirming whether to
save the settings.
5.
Touch the [YES] button to save the settings and restart. Touch the
[NO] button to discard the changes.
23 COMMUNICATION INTERFACE SETTING (COMMUNICATION SETTING)
[Controller
197
23.1 Standard I/F Setting
23