Section 10: Hazard Avoidance; Customizing The Hazard Displays On The Navigation Map; Stormscope® (Optional); Displaying Stormscope Lightning Data On The - Garmin G1000 Reference Manual

SECTION 10: HAZARD AVOIDANCE

10.1 CUSTOMIZING THE HAZARD
DISPLAYS ON THE NAVIGATION MAP
1) With the Navigation Map Page displayed, press
the MENU Key to display the Navigation Map
Page Menu. The cursor flashes on the 'Map
Setup' option.
2) Press the ENT Key. The Map Setup Menu is
displayed. Turn the small FMS Knob to select
the 'Weather' group (Figure 10-2) to customize
the display of weather features. Select 'Traffic'
to customize the display of traffic.
3) Press the small FMS Knob to return to the

Navigation Map Page.

Figure 10-1 Page Menu
Figure 10-2 Map Setup Menu
Figure 10-3 Map Setup Group List
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
10.2 STORMSCOPE® (OPTIONAL)
WARNING: The Stormscope system is not
intended to be used for hazardous thunderstorm
penetration. Weather information on the G1000
MFD is approved for weather avoidance only.
Refer to the WX-500 Pilot's Guide for detailed
operation.

Displaying Stormscope Lightning Data on the

Navigation Map Page
1) Press the MAP Softkey.
2) Press the STRMSCP Softkey. Press the STRMSCP
Softkey again to remove Stormscope Lightning
Data from the Navigation Map Page.
Figure 10-4 In-Flight Navigation Map Page Displaying
Stormscope Lightning Data
SECTION 10 – HAZARD
AVOIDANCE
10-1