Preparing for Use
To
clean
the
logic analyzer
3 Reinsert the fuse module with the arrow for the appropriate line voltage aligned
with the arrow on the line filter assembly switch.
FUSE
rUSE
4 Reconnect the power cord. Turn on the instrument by setting the power switch to
the On position.
To clean the logic analyzer
With the instrument turned off and unplugged, use mild soap and water to clean the
front and cabinet of the logic analyzer. Harsh soap might damage the water-base
paint.
To test the logic analyzer
• If you require a test to verify the specifications, start at the beginning of chapter 3,
"Testing Performance."
• If you require a test to initially accept the operation, perform the self-tests in
chapter 3.
• If the logic analyzer does not operate correctly, go to the beginning of chapter 5,
"Troubleshooting."
2-4