Table of Contents
Advertisement
The self-tests verify the correct operation of the logic analyzer. Self-tests can be
performed all at once or one at a time. While testing the performance of the logic
analyzer, run the self-tests all at once.
The performance verification (PV) self-tests consist of system PV tests, analyzer PV
tests, oscilloscope PVtests (HP 1660ES series only), and pattern generator test (HP
1660EP series only).
These procedures assume the files on the PV disk have been copied to the /SYSTEM
subdirectory on the hard disk drive. lf they have not already been copied, insert the
PV disk in the flexible disk drive before starting this procedure.
1 Disconnect all inputs, then turn on the power switch. Walt until the power-up tests
are complete.
2 Press the System key. Select the field next to System, then select Test in the pop-up
menu.
I
SIn,len, )
102 Channel
1(,0 11K; STAT
%<'
IlH; TlnH
"
Ch~"nel$
of
16SI, Swgle Shot
OS(lllo,cope
I
S1lt50L UTILITY
I
IPmtJ
3 Select the box labeled Load Test System, then select Continue.
4 Press the System key. Select the field next to Sys PV, then select System Test
in
the
pop-up menu.
Hord
[0
I
~l,
Connene
L::J
;:'='=-I-_'_'_O"_"_"_'_'_$k_-r-
E:dorna\ I/O
Ulllltl%
136
Channel~
100 NK: STAT
50(' NH: TIltH
~
Ct'llnne I
$
<)
1G5/$ SIngle Shot
O~C
111 oscape
1<5232 So t I iogs
HPID So ttl og$
3-3
Advertisement
Table of Contents
