Table of Contents
Advertisement
Testing Performance
To test the glitch capture (logic analyzer)
6 On the logic analyzer, press the Run key. The display should be similar to the figure
below.
LOl)]
LOllI
LOllI
LollI
LOlli
Lot))
LollI
LMJl
lM.o1
LOOI
Lot>1
Lob!
LO[lI
Lull!
Lob!
LobI
Lobi
LM)]
rl~veform
t1ACHIHE I
) (ACq
(OntrOI)
_
~
Current
S~mple
Period -
6.0000$
Next
S~mple
Period·
6.000 n&
7 On the pulse generator, enable Channell and Channel 2 CaMP (with the LED on).
8 On the logic analyzer, press the Run key. The display should be similar to the figure
below. Record Pass or Fail in the performance test record.
Hovelorm MACHINE I
(Acq, Control)
~ ~
Test the next charmels
• Return to "Connect the logic analyzer" on page 3-19 and connect and test the next
combination of data and clock channels until
all
pods are tested.
To access pods 2, 4, 6, or 8 in the Format menu, select pods 1, 3, 5, or 7 fields, then select the
other pod in the pop-up menu. Use the knob to access pods that are not shown on the screen.
3-23
Advertisement
Table of Contents
