HP 1660E Series Service Manual page 54

Testing Performance
To test the single-clock, single-edge, state acquisition (logic analyzer)
Connect the HP 1662EjESjEP or HP 1663EjESjEP Logic Analyzer to the Pulse Generator
Testing
Combination
Connect to
HP 8133A
Channel 2 Output
Pod 1, channel 3
Pod 2, channel 3
Pod 3, channel 3
Pod 4, channel 3
Connect to
HP 8133A Channel
2 Output
Pod 1, channel 11
Pod 2, channel 11
Pod 3, channel 11
Pod 4, channel 11
Connect to
HP 8133A Channel
1 Output
J-clock
IQ]
e133 Opllon 003
[ ]
3 Activate the data channels that are connected according to one of the previous
tables.
a Press the Format key.
b Select the field showing the channel assigrnnents for one of the pods being tested,
then press the Clear entry key. Using the arrow keys, move the selector to the dats
channels to be tested, then press the Select key. An asterisk means that a channel
is
turned on. When all the correct channels ofthe pod are turned on, press the Done
key. Follow
this
step for the remaining pods.
5101~ AcqOl~1
tlon
N(ld~
Full Choonel/21· r1emOrll'!(IOrlH;
'11
··11 .
Lobi
Lab2
Lob;·
~ (
rormJt
r1RCHWE 1 )
LoO_l
lobS
Lobo
Lob7
Lob8
3-28