HP 1660E Series Service Manual page 34

Testing Performance
To make the test connectors (logic
analyzer)
2 Build one test connector using aBNe connector and a 17-by-2 section of Berg strip.
a Solder ajurnper wire to all pins on one side of the Berg strip.
b Solder ajurnper wire to all pins on the other side of the Berg strip.
e Solder the center of the BNC conneetorto the center pin of one row on the Berg strip.
d Solder the ground tab of the BNC connector to the center pin of the other row on the
Berg strip.
Jumpers
(2)
~:r;;'
1h2 8e,g Sl,;p
~
BNC Panel Mount Connector
16~:>OEO!:l
3-8