To Clean The Logic Analyzer Module - HP 16550A User Reference

Installation and Testing

To clean the logic analyzer module

Touch 100/500 MHz LA. If more logic analyzer cards are to be tested,
7
select the next card, then repeat the test. When all cards are tested,
touch 100/500 MHz, then select Test System.
Touch Configuration, then select Exit Test.
8
Touch the box labeled Touch box to Exit Test System.
9
To clean the logic analyzer module
With the instrument turned off and unplugged, use mild soap and water to
clean the front of the module. Harsh soap might damage the water-based
paint.
13–12