Table of Contents
Advertisement
Exclusive jump starting terminal (your vehicle)
A
Positive (+) battery terminal (second vehicle)
B
Negative (-) battery terminal (second vehicle)
C
Solid, stationary, unpainted metallic point away from the exclusive jump starting
D
terminal and any moving parts as shown in the illustration
NOTICE
■
When handling jumper cables
When connecting the jumper cables, ensure that they do not become entangled in
the cooling fan or belt.
■
Exclusive jump starting terminal
The exclusive jump starting terminal is intended to charge the 12-volt battery on your
vehicle from another vehicle in an emergency.
Do not use the exclusive jump starting terminal to jump start another vehicle.
5
Start the engine of the second vehicle. Increase the engine speed slightly
and maintain at that level for approximately 5 minutes to recharge the 12-volt
battery of your vehicle.
6
Open and close any of the doors of your vehicle with the power switch off.
7
Maintain the engine speed of the second vehicle and start the hybrid system of
your vehicle by turning the power switch to ON.
8
Make sure the "READY" indicator comes on.
If the indicator light does not come on, contact your Lexus dealer.
9
Once the hybrid system has started, remove the jumper cables in the exact
reverse order from which they were connected.
9-5. If a door cannot be opened or locked
9
673
Advertisement
Table of Contents
