Table of Contents
Advertisement
Pull the lever rearward and then return it to its
●
original position.
The high beams will illuminate while the lever is
pulled, however, after the lever is returned to its
original position, the low beams will remain on for
a certain amount of time. After this, the Adaptive
High-beam System will operate.
AHB (Automatic High Beam)
The Automatic High Beam uses a front camera located on the upper portion of the
windshield to detect the brightness of the lights of vehicles ahead, streetlights, etc.,
and automatically changes the head lights between the high beams and low beams.
WARNING
■
For safe use
Do not overly rely on the Automatic High Beam. Always drive safely, taking care to
observe your surroundings and turning the high beams on or off manually if necessary.
■
To prevent unintentional operation of the Adaptive High-beam System
When it is necessary to disable the system:
Using the Automatic High Beam system
1
Press the Automatic High Beam switch.
2
Turn the headlight switch to the [AUTO] or
[
] position.
When the headlight switch lever is in the low
beam position, the AHS system will be enabled
and the AHB indicator will illuminate.
3-1. Driving when the surrounding area is dark
→ P.341
3
203
Advertisement
Table of Contents
