Table of Contents
Advertisement
5-1. Functions and displays of the meter
■
Free/Open Source Software Information
This product contains Free/Open Source Software (FOSS). The license information
and/or the source code of such FOSS can be found at the following URL.
https://www.denso.com/global/en/opensource/meter/toyota/
WARNING
Allow the interior of the vehicle to warm up before using the liquid crystal information
display. At extremely low temperatures, the information display monitor may respond
slowly, and display changes may be delayed.
For example, there is a lag between the driver' s shifting and the new gear number
appearing on the display. This lag could cause the driver to downshift again, causing rapid
and excessive engine braking and possibly an accident resulting in death or injury.
NOTICE
To prevent the engine or components from being damaged, observe the following
precautions.
●
Do not let the indicator needle of the tachometer enter the red zone, which indicates
the maximum engine speed.
The engine may be overheating if the engine coolant temperature gauge is in the red
●
zone (H); or "Engine Coolant Temp High Stop in a Safe Place See Owner's Manual"
is shown on the multiinformation display. In this case, immediately stop the vehicle in a
safe place, and check the engine after it has cooled completely.
Related Links
Customizable features(P. 739)
Hybrid system indicator
The hybrid system indicator displays the hybrid system output or regeneration
level.
This illustration is for explanation only and may differ depending on the specifica-
tions of the vehicle.
314
Charge area
A
Shows regeneration status.
Regenerated energy will be used to charge the
hybrid battery (traction battery).
When used in this manual, "regeneration" refers
to the conversion of energy created by the
movement of the vehicle into electrical energy.
Advertisement
Table of Contents
