Table of Contents
Advertisement
WARNING
The jam protection function may not operate if something is caught just before the
●
seatback is fully returned. Be careful so that fingers, etc. do not get caught.
The jam protection function may not operate depending on the shape or position of
●
the obstruction. Be careful so that fingers, etc. do not get caught.
NOTICE
The seat belt for the rear center seat, seat belt buckles and armrest must be stowed
before you fold down the rear seatbacks.
Automatic folding of the rear seat seatbacks by pressing the switch in the
luggage compartment (vehicles with power seats)
INFORMATION
■
Operating conditions for folding down the seatback
When all of the following conditions are met, a rear seat operation switch can be used to
fold down the rear seatback:
When the back door is open.
●
●
When the other operation switches for the seat being operated are not pressed.
When the power switch is in ON, in addition to the above, the power seat operates for
any of the following conditions:
●
Parking brake is engaged
The brake pedal is depressed
●
●
The shift position is in P
1
Stow the rear center seat belt, seat belt buckles and armrest.
2
Lower the head restraint of the rear seat.
3
Press and hold the switch to fold down the
corresponding seatback.
A buzzer will sound and the seatback folding op-
eration will begin. When the operation is complet-
ed, the buzzer will sound again.
To stop the seatback folding operation partway,
press either side of the rear seat switch or the
switch in the luggage compartment for the oper-
ating seat. When the operation stops, a buzzer will sound.
1-5. Entering/exiting the vehicle and loading luggage
1
109
Advertisement
Table of Contents
