Table of Contents
Advertisement
Portable devices compatible with the Qi wireless charging standard can be charged
●
by the wireless charger. However, compatibility with all devices which meet the Qi
wireless charging standard is not guaranteed.
The wireless charger is designed to supply low power electricity (5 W or less) to a
●
cellular phone, smartphone, or other portable device.
Failure to do so may result in the possibility of fire,However, portable devices, such as
●
the following, can be charged with more than 5 W.
7.5 W charging compatible iPhones can be charged at 7.5 W or less.
•
Portable devices which conform to WPC Ver 1.2.4 （Extended Power profile）
•
can be charged at 10 W or less.
■
Using the smart access system with push-button start
During charging, when the smart access system with push-button start searches for an
electronic key, charging may be temporarily suspended.
■
If a cover or accessory is attached to the portable device
Do not charge a portable device if a cover or accessory which is not Qi compatible is
attached.
Even if a device is "Qi" compatible, charging may not be possible if a cover or accessories
are attached.
(→
P.291）
■
Charging precautions
While charging, the wireless charger and the portable device will become warm. This is
not a malfunction.
If a portable device becomes warm while charging and charging stops due to the
protection function of the portable device, wait until the portable device cools down and
charge it again.
Also, to decrease the temperature inside the wireless charger, a fan may operate. This
does not indicate a malfunction.
■
Sound generated during operation
Operation sounds may be heard when the power switch is pressed to change to ACC or
ON, or when a portable device is being detected. This does not indicate a malfunction.
■
"Qi" symbol
The "Qi" logo is a trademark of the Wireless Power Consortium.
4-5. Using the interior features
4
289
Advertisement
Table of Contents
