Changing between the tachometer/hybrid system indicator/speedom-
eter displays
Depending on the current drive mode or settings, the displays will change as
follows. Settings can be changed on the center display.
Vehicles without a head-up display
■
Tachometer
●
The tachometer will be displayed in the following situations when the meter display type
setting is set to display type 1 or display type 3.
•
When the tachometer setting is set to always display the tachometer
When the tachometer setting is set to change according to the driving mode and
•
sport mode is selected
Hybrid System Indicator
●
The hybrid system indicator will be displayed in the following situations when the meter
display type setting is set to display type 1 or display type 3.
When the tachometer setting is set to always display the hybrid system indicator
•
When the tachometer setting is set to change according to the driving mode and a
•
driving mode other than sport mode is selected
Speedometer
●
Always displayed.
The display will change between a digital speedometer and/or analog speedometer
depending on the meter display type setting.
5-1. Functions and displays of the meter
Eco area
B
Shows that the vehicle is being driven in an Eco-
friendly manner.
By keeping the indicator needle within Eco area,
more Eco-friendly driving can be achieved.
Power area
C
Shows that an Eco-friendly driving range is be-
ing exceeded (during full power driving etc.)
Hybrid Eco area
D
Shows that gasoline engine power is not being
used very often.
The gasoline engine will automatically stop and
restart under various conditions.
5
315