When objects that are not perpendicular to the ground, not perpendicular to the
●
vehicle traveling direction, uneven, or waving are in the detection range.
When strong winds are blowing
●
●
When driving in inclement weather such as fog, snow or a sandstorm
When an object that cannot be detected is between the vehicle and a detected object
●
If an object such as a vehicle, motorcycle, bicycle or pedestrian cuts in front of the
●
vehicle or runs out from the side of the vehicle
If the orientation of a sensor has been changed due to a collision or other impact
●
●
When equipment that may obstruct a sensor is installed, such as a towing eyelet,
bumper protector (an additional trim strip, etc.), bicycle carrier, or snow plow
●
If the front of the vehicle is raised or lowered due to the carried load
●
If the vehicle cannot be driven in a stable manner, such as when the vehicle has been in
an accident or is malfunctioning
When a tire chains, compact spare tire or an emergency tire puncture repair kit is
●
used
■
Situations in which the system may operate even if there is no possibility of a
collision
In some situations, such as the following, the system may operate even though there is no
possibility of a collision.
When driving on a narrow road
●
When driving toward a banner, flag, low-hanging branch or boom barrier (such as
●
those used at railroad crossings, toll gates and parking lots)
When there is a rut or hole in the surface of the road
●
When driving on a metal cover (grating), such as those used for drainage ditches
●
●
When driving up or down a steep slope
If a sensor is hit by a large amount of water, such as when driving on a flooded road
●
There is dirt, snow, water drops or ice on a sensor. (Cleaning the sensors will resolve
●
this problem.)
A sensor is coated with a sheet of spray or heavy rain
●
●
When driving in inclement weather such as fog, snow or a sandstorm
6-2. Using the safe driving support functions
6
401