Table of Contents
Advertisement
2. Turn the power switch to ON and register the smartphone as a Bluetooth
device to the multimedia system. For details on registering a Bluetooth
device, refer to the"MULTIMEDIA OWNER'S MANUAL".
3. Setup the Remote Park app and register the vehicle.
4. The registered vehicle will be displayed on the screen of the smartphone.
Select the vehicle.
The name and image of the vehicle can be changed on the new vehicle registra-
tion screen.
Vehicles can be added through the menu screen.
Remote control function on/off
1
Select
and then select [Advanced Park] on the center display.
2
Select [Remote Park] to turn it on/off. (The default setting is on.)
3
Press the Advanced Park main switch.
If the switch is pressed while assistance is being
performed, the assistance will be canceled.
4
Select the
button displayed on the center display.
NOTICE
●
When using Remote control function, make sure carry an electronic key in your
pocket, etc.
●
If an electronic key is held together with a smartphone, etc., the electronic key may
not be able to be detected.
●
Remote control function cannot be used when carrying only a digital key. The
driver should always carry the electronic key.
●
When entering the vehicle after using Remote control function, make sure that the
electronic key is brought into the vehicle and all of the doors are closed.
After entering the vehicle and ending Remote control function operation, the seat
return function will operate when the driver' s seat seat belt is fastened or the
brake pedal is depressed. (Vehicles with the power easy access system) The driver
should always carry the electronic key.
If the power switch is turned off when Remote control function operation has
●
finished or been canceled, the doors will be locked automatically. However, if a
6-2. Using the safe driving support functions
6
473
Advertisement
Table of Contents
