Lexus NX350h 2022 Owner's Manual page 189

3 Press and hold the desired HomeLink
ton (inside the vehicle) for 2 seconds and re-
lease it. Repeat this sequence (press/hold/
release) up to 3 times to complete program-
ming.
If the garage door opener motor operates when
®
the HomeLink
door opener motor recognizes the HomeLink
signal.
2-way communication with a garage door and its performance
When enabled, 2-way communication allows you to check the status of the open-
ing and closing of a garage door through indicators in your vehicle.
2-way communication is only available if the garage door opener motor used is a
compatible device.
To check device compatibility, refer to www.HomeLink.com.
Enable 2-way communication with a garage door
1 Within 5 seconds after programming the garage door opener has been com-
pleted, if the garage door opener motor is trained to HomeLink
door operation indicators will flash rapidly green and the light on the garage
door opener motor will blink twice, indicating that 2-way communication is
enabled.
If the indicators do not flash, perform
®
HomeLink button after programming has been completed.
2 Press a programmed HomeLink
3 Within 1 minute of pressing the HomeLink
operation has stopped, press the "Learn" or "Smart" button on the garage door
opener motor.
button is pressed, the garage
®
® Vehicles with auto anti-glare
▶
but-
inside rear view mirror
®
Vehicles with Digital Rearview
▶
Mirror
2 and 3 within the first 10 presses of the
button to operate a garage door.
®
button, after the garage door
2-3. Parking the vehicle
®
, both garage
187
2