Table of Contents
Advertisement
6-2. Using the safe driving support functions
Position of the sensors of the Intuitive assist sensor
WARNING
■
Notes when washing the vehicle
Do not apply intensive bursts of water or steam to the sensor area.
Doing so may result in the sensor malfunctioning.
●
When using a high pressure washer to wash the vehicle, do not spray the sensors
directly, as doing so may cause a sensor to malfunction.
●
When using steam to clean the vehicle, do not direct steam too close to the sensors, as
doing so may cause a sensor to malfunction.
Turning the intuitive parking assist function ON/OFF
The intuitive parking assist can be enabled/disabled on the center display as
follows:
1
Select
.
2
Select [Driving assist].
3
Select [Intuitive parking assist] to change ON (enable)/OFF (disabled).
When ON (enable) is selected, the intuitive parking assist indicator comes on.
When turned OFF (disabled), the intuitive parking assist will be disabled and will not be
enabled until the setting is changed to ON again in center display.
(The system will not be reenabled by operating the power switch.)
404
Front corner sensors
A
Front center sensors
B
Rear corner sensors
C
Rear center sensors
D
Front side sensors (vehicles with Advanced
E
Park)
Rear side sensors (vehicles with Advanced
F
Park)
Advertisement
Table of Contents
