Table of Contents
Advertisement
1-5. Entering/exiting the vehicle and loading luggage
●
When the vehicle is near a TV tower, electric power plant, radio station, large display,
airport or other facility that generates strong radio waves or electrical noise
●
When the vehicle is parked in a place where objects such as plants are near the rear
bumper
●
If luggage is set near the rear bumper
If accessories or a vehicle cover is installed/removed near the rear bumper
●
When the vehicle is being towed
●
To prevent unintentional operation, turn the kick sensor operation setting off.
Open/close the back door using the kick sensor(vehicles with Hands Free
Power Back Door)
WARNING
Observe the following precautions when operating the power back door.
Check the safety of the surrounding area to make sure there are no obstacles or
●
anything that could cause any of your belongings to get caught.
When putting your foot near the lower center part of the rear bumper and moving it
●
from the rear bumper, be careful not to touch the exhaust pipes until they have cooled
down sufficiently.
If the exhaust pipes are hot, they can cause burns.
●
Do not operate the Hands Free Power Back Door if there is little space under the rear
bumper.
3
When a buzzer sounds, move your foot back. A buzzer will sound and the back
door will automatically fully open or close.
Perform the entire kick operation within 1 second.
●
106
Kick sensor
A
Kick sensor detection area
B
Smart access system with push-button start
C
operation detection area
1
While carrying an electronic key, stand with-
in the smart access system with push-button
start operation range, approximately 19.7 to
27.6 in. (50 to 70 cm) from the rear bumper.
2
Move your foot to approximately 3. 9 in. (10
cm) from the rear bumper.
Operate the back door without contacting the rear
bumper with your foot.
Advertisement
Table of Contents
