6-2. Using the safe driving support functions
●
When the distance between your vehicle and met-
al objects, such as a guardrail, wall, sigh, or parked
vehicle, which may reflect electrical waves toward
the rear of the vehicle, is short
●
When equipment that may obstruct a sensor is installed, such as a towing eyelet,
bumper protector (an additional trim strip, etc.), bicycle carrier, or snow plow
When a vehicle passes by the side of your vehicle
●
When a detected vehicle turns while approaching
●
the vehicle
●
When there are spinning objects near your vehicle such as the fan of an air condition-
ing unit
●
When water is splashed or sprayed toward the rear bumper, such as from a sprinkler
Moving objects (flags, exhaust fumes, large rain droplets or snowflakes, rain water on
●
the road surface, etc.)
When the distance between your vehicle and a guardrail, wall, etc., that enters the
●
detection area is short
Gratings and gutters
●
When a sensor or the area around a sensor is extremely hot or cold.
●
●
If the suspension has been modified or tires of a size other than specified are installed
●
If the front of the vehicle is raised or lowered due to the carried load
414