Table of Contents
Advertisement
Installing the tire
1
Remove any dirt or foreign matter from the
wheel contact surfaces and wheel bolts.
If foreign matter is not removed, the wheel bolts
may loosen while the vehicle is in motion, and the
wheel may come off.
2
Align a wheel bolt hole on the spare tire with
the guide pin, and set the spare tire on the
guide pin.
Align the center hole of the wheel with the center
of the hub and securely set the spare tire so that
the wheel and hub contact surfaces are touching.
WARNING
When removing or installing a tire, make sure to use the guide pin.
Also, the guide pin is made of resin. It may be damaged if the wheel is placed
anywhere other than
3
Loosely tighten each wheel bolt by hand or
using a wheel bolt socket
Do not use the wheel bolt socket for anything
other than loosely tightening the wheel bolts by
hand.
or if a large amount of force is applied to the guide pin.
.
8-5. Tire maintenance
597
8
Advertisement
Table of Contents
