9-4. If a tire is flat
2
Remove the valve cap from the valve of the punctured tire.
3
Extend the hose. Remove the air release cap from the hose.
Attach the sticker enclosed with the bottle on the specified locations.(See step 10.)
The air release cap may be used later. Therefore keep it in a safe place.
4
Connect the hose to the valve of the flat tire.
Screw the end of hose clockwise as far as possible.
WARNING
Check the following.
●
Make sure that the valve and hose are securely connected, with the tire installed
on the vehicle.
If the hose is not properly connected to the valve, air leakage may occur or sealant
●
may be sprayed out.
656