Table of Contents
Advertisement
3
Select the
button and then select [Perpendicular/parallel] .
4
Select [OK] button.
5
Exit the vehicle while carrying the electronic key and smartphone, and then
start the Remote Park app on the smartphone.
The detection area of the electronic key is within approximately 9.8 ft.(3 m) around the
vehicle.
If there is an obstruction in the path of the vehicle, move it before parking the vehicle. A
corn can also be moved after exit the vehicle.
6
From outside of the vehicle, confirm the parking space on the screen of the
smartphone and then select the start button.
Start operation of Remote control function while standing approximately 1.6 ft. (50 cm)
or more from the vehicle and out of the path of the vehicle.
7
Checking the safety of the area around the vehicle, trace the operation area on
the screen of the smartphone continuously, the vehicle will move and parking
assistance will be performed.
If operation of the screen of the smartphone is stopped, assistance can be suspended
and the vehicle can be stopped. The doors are automatically locked before the vehicle
starts moving.
8
When the parking space is reached, after the vehicle is stopped by the parking
brake, the shift position will be changed to P, the power switch will be turned off,
and the doors will be locked.
A completion screen will be displayed on the smartphone.
INFORMATION
■
The parking function can be used even if obstructions exist if
When using the parking functions at a parking space made of white lines, even
●
if an obstruction exists in the parking space, the space can be set as the target
parking space. This allows for assistance to continue after setting a parking space
from inside the vehicle and then exiting the vehicle to move an obstruction, such as
a traffic cone placed in a handicapped parking space.
●
When perpendicular parking using Advanced Park, 3 parking spaces on each
side of the vehicle (up to 6 total) can be detected. However, when using Remote
control function, only 1 parking space on each side of the vehicle can be detected.
Moving the vehicle forward and backward using Remote control function
After the vehicle is stopped, assistance can be provided to move the vehicle into a
garage, etc., by using the forward and backward movement function.
6-2. Using the safe driving support functions
6
469
Advertisement
Table of Contents
