Table of Contents
Advertisement
9-4. If a tire is flat
WARNING
●
Do not touch the metal connecting parts of the bottle and compressor while being
used or immediately after, as they will be extremely hot.
14
Inflate the tire until the specified pressure is reached.
The sealant will be injected and the pressure will spike to between 44 psi (300
A
kPa, 3.0 kgf/cm
decrease.
The air pressure gauge will display the actual tire inflation pressure about 1 to 5
B
minutes after the switch is turned on.
Turn the compressor switch off and then check the tire inflation pressure. Being
●
careful not to over inflate, check and repeat the inflation procedure until the
specified tire inflation pressure is reached.
The tire can be inflated for about 5 to 20 minutes (depending on the outside
●
temperature). If the tire inflation pressure is still lower than the specified point
after inflation for 25 minutes, the tire is too damaged to be repaired. Turn the
compressor switch off and contact your Lexus dealer.
If the tire inflation pressure exceeds the specified level, let out some air to adjust
the tire inflation pressure.
15
With the compressor switch off, disconnect the hose from the valve on the tire
and then pull out the power plug from the power outlet socket.
Some sealant may leak when the hose is removed.
660
2
or bar) and 58 psi (400 kPa, 4.0 kgf/cm
2
or bar), then gradually
Advertisement
Table of Contents
