INFORMATION
■
The system will operate when
The function will operate when the driving assist infomation indicator is not illuminated or
flashing and all of the following conditions are met:
●
Hybrid system output restriction control
•
PKSB (Parking Support Brake) system is enabled.
•
The vehicle speed is 9 mph (15 km/h) or less.
Vehicles are approaching from the right or left at the rear of the vehicle at a
•
traveling speed of approximately 5 mph (8 km/h) or more.
The shift position is in R.
•
The PKSB (Parking Support Brake) determines that a stronger than normal brake
•
operation is necessary to avoid a collision with an approaching vehicle.
Brake control
●
•
Hybrid system output restriction control is operating.
•
The PKSB (Parking Support Brake) determines that an emergency brake operation
is necessary to avoid a collision with an approaching vehicle.
■
The system will stop operating when
The function will stop operating if any of the following conditions are met:
●
Hybrid system output restriction control
PKSB (Parking Support Brake) system is disabled.
•
The collision becomes avoidable with normal brake operation.
•
•
A vehicle is no longer approaching from the right or left at the rear of the vehicle.
●
Brake control
•
PKSB (Parking Support Brake) system is disabled.
Approximately 2 seconds have elapsed since the vehicle was stopped by brake
•
control.
The brake pedal is depressed after the vehicle is stopped by brake control.
•
A vehicle is no longer approaching from the right or left at the rear of the vehicle.
•
■
Detection range
The detection range of the system differs from the detection area of the RCTA function.
→ P.416
Therefore, even if the RCTA function detects a vehicle and provides an alert, the
PKSB (Parking Support Brake) system may not start operating.
6-2. Using the safe driving support functions
6
431