Table of Contents
Advertisement
3-1. Driving when the surrounding area is dark
•
When headlights or tail lights of vehicles ahead are turned off, dirty, changing color,
or not aimed properly
•
When the headlights are repeatedly changing between the high beams and low
beams.
•
When use of the high beams is inappropriate or when the high beams may be
flashing or dazzling pedestrians or other drivers.
When the vehicle is used in an area in which vehicles travel on the opposite side
•
of the road of the country for which the vehicle was designed, for example using a
vehicle designed for right-hand traffic in a left-hand traffic area, or vice versa
When it is necessary to disable the system:
•
•
Situations in which the sensors may not operate properly:
■
Customization
The settings of some functions can be changed.
Turning the high beams on/off manually
■
Changing to the high beams
Push the lever forward.
●
The AHS indicator will turn off and the high
beam indicator will turn on.
Pull the lever to its original position to enable the
Adaptive High-beam System again.
■
Changing to the low beams
Press the Adaptive High-beam System switch.
●
The AHS indicator will turn off.
Press the switch to enable the Adaptive High-
beam System again.
Temporarily changing to the low beams
It is recommended to switch to the low beams when use of the high beams is
inappropriate or when the high beams may cause problems or distress to other
drivers or pedestrians nearby.
202
→ P.341
→ P.346
→ P.747
Advertisement
Table of Contents
