Table of Contents
Advertisement
9-5. If a door cannot be opened or locked
WARNING
■
When replacing the 12-volt battery
After replacing, securely attach the exhaust hose and exhaust hole plug to the exhaust
hole of the new 12-volt battery. If not properly installed, gases (hydrogen) may leak into
the vehicle interior, and there is the possible danger of the gas igniting and exploding.
1
Confirm that the electronic key is being car-
ried.
When connecting the jumper (or booster) cables,
depending on the situation, the alarm may activate
and the doors may lock.
2
Open the hood and exclusive jump starting
terminal cover.
3
Open the exclusive jump starting terminal
cover.
4
Connect a positive jumper cable clamp to
clamp on the other end of the positive cable to
connect a negative cable clamp to
clamp at the other end of the negative cable to
672
on your vehicle and connect the
on the second vehicle. Then,
on the second vehicle and connect the
.
Advertisement
Table of Contents
