Table of Contents
Advertisement
INFORMATION
■
Changing the shift position in each power switch mode
The shift position cannot be changed when the power switch is in ACC or off.
●
●
When the power switch is in ON, if the "READY" indicator is not illuminated, the shift
position can only be changed to N.
●
When the "READY" indicator is illuminated, the shift position can be changed from P
to D, N, or R.
●
When the "READY" indicator is flashing, the shift position cannot be changed from P
to any other position, even if the shift lever is operated. Operate the shift lever again
after the "READY" indicator changes from flashing to illuminated.
■
Shifting the shift position from P to other positions
While depressing the brake pedal firmly, operate the shift lever. If the shift lever is
●
operated without depressing the brake pedal, the buzzer will sound and the shifting
operation will be disabled.
When selecting the shift position, make sure that the shift position has been changed
●
to the desired position by checking the shift position indicator provided on the
instrument cluster.
When shifting from P to N, D or R, from N, D,
S or R to P, from D or M to R, or from R to D,
ensure that the brake pedal is being depressed
and the vehicle is stationary.
Shift position indicator
B
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
P position switch
C
Fully stop the vehicle and set the parking brake,
and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator shows P.
2-2. Driving procedures
167
2
Advertisement
Table of Contents
