Lexus NX350h 2022 Owner's Manual page 586

Table of Contents

Advertisement

8-5. Tire maintenance
10
If the tire inflation pressure of the wheel set installed differs from that of the
previous set, it will be necessary to perform the tire inflation pressure setting
procedure of the tire pressure warning system.
If the specified tire inflation pressure is the same, it will not be necessary to perform the
tire inflation pressure setting procedure.
Related Links
Setting the tire pressure(P. 579)
Canceling ID code registration
To cancel ID code registration after it has been started, select [New tire registra-
tion] again on the center display.
If ID code registration has been canceled, the tire pressure warning light will turn off.
If the warning light does not turn off, ID code registration may not have been cancelled
correctly. To cancel registration, select [New tire registration] again on the center display.
Selecting wheel set
Your vehicle is equipped with a tire pressure warning system with a function to
register two sets of ID codes. This allows for registration of a second wheel set, for
example a winter set.
The wheel set can be changed only if a second wheel set has been registered to
the system. If a second wheel set has not been registered, "Set 2(Unregistered)"
will be displayed and it will not be possible to change to the selected wheel set.
ID codes can be registered by yourself.
Only a change between both registered wheel set is possible, mixing between
these wheel sets is not supported.
While registering ID codes, it may not be possible to change between wheel
sets normally. Cancel registration before changing between wheel sets.
1
Install the desired wheel set.
2
Select
on the center display.
3
Select [Vehicle customize].
4
Select [Tire pressure].
5
Select the wheel set ([Set 1] or [Set 2]) displayed for the set selection setting.
6
Select the wheel set you wish to register, and then select [OK].
The tire pressure warning light will slowly blink 3 times, a message indicating that
change is occurring will be displayed, and the wheel set change will begin.
584

Advertisement

Table of Contents
loading

Table of Contents